Bottling day checklist

Bottling is simple but unforgiving: nearly every ruined batch and every bottle bomb traces back to skipping a step here. Work the list in order.

  1. Confirm it's done. Stable gravity over 2–3 days, in the recipe's expected range. If it's still dropping, wait.
  2. Calculate priming sugar. Use the priming sugar calculator with your batch size, style, and the coldest temp the beer reached. Weigh it on a scale — don't scoop by volume.
  3. Sanitize everything. Bottles, caps, bottling bucket, racking cane, tubing, wand. Star San or iodophor, proper contact time, no shortcuts.
  4. Dissolve the sugar. Boil the priming sugar in 2 cups of water for 5 minutes, cover, and cool it. Pour it into the bottling bucket first.
  5. Rack gently onto the sugar. Siphon the beer onto the cooled sugar solution with the tube below the surface. No splashing — oxygen at this stage stales beer fast. A gentle stir with a sanitized spoon mixes it evenly.
  6. Fill to ~1 inch of headspace. A bottling wand filled to the brim leaves about the right headspace when removed. Cap immediately.
  7. Condition warm. Store bottles around 70°F (21°C) for 2–3 weeks. Yeast carbonates slowly when cold.
  8. Chill before opening. 24–48 hours in the fridge lets CO₂ dissolve fully into the beer instead of foaming out.

Signs of trouble

Causes, in order of likelihood: bottling before fermentation finished, too much priming sugar (measured by volume instead of weight), or an infection that kept fermenting in the bottle.

Frequently asked questions

How do you know when beer is ready to bottle?

Stable hydrometer readings 2–3 days apart, in the expected range. Not the airlock, not the calendar.

How much headspace should you leave in beer bottles?

About 1 inch (2–3 cm). A bottling wand filled to the brim leaves roughly the right amount when removed.

What should you do if your bottles are over-carbonated?

Chill them cold, open carefully pointed away from people, ideally outdoors. Bulging caps or violent gushers across the batch mean you should consider dumping it — no beer is worth an injury.

A bottling day, timed out

For a standard 5-gallon batch, plan on roughly 90 minutes of active work, most of it before the first bottle is filled. A realistic order looks like this. Start by mixing sanitizer and soaking caps, the bottling wand, tubing, and racking cane, since contact time cannot be rushed later. While those soak, wash and inspect about 54 twelve-ounce bottles, because 640 ounces of beer at 12 ounces per bottle, plus a little loss to trub, lands near that count, and finding a chipped bottle mid-fill is how sessions stall. Boil the priming sugar solution next so it has time to cool, then rack the beer onto it, fill, and cap in one steady pass. Bottling rewards a mise en place mindset: everything sanitized, counted, and within reach before the fermenter is opened.

What a batch costs to bottle

The consumables are small, which is why the checklist matters more than the budget. Priming sugar for that 5-gallon batch, about 125 g of corn sugar at a 2.5-volume target, costs well under a dollar. Crown caps run a few cents each, so a full batch uses roughly $2 to $3 of caps. Sanitizer, mixed once and reused across the session, adds a dollar or less. The real cost of a bottling mistake is not money, it is the batch itself: five gallons of beer, weeks of waiting, and the ingredients that went into it. That asymmetry is the whole argument for working the list in order, weighing sugar instead of scooping it, and confirming a stable gravity before a single bottle is filled.

The two numbers to write down

Before you cap the first bottle, record the final gravity and the exact weight of priming sugar you used, on the same brew log that holds your original gravity. If a batch later pours under or over carbonated, those two numbers tell you which lever to move next time, and by how much. Brewers who log them converge on their target carbonation within a batch or two; brewers who guess tend to chase the same problem all year.