Project Cost HQ

Cordless drill specs, compared honestly.

Which cordless tools to buy first (and in what order)

The classic beginner mistake is buying a 6-tool combo kit on sale and using two of the tools. Buy in order of actual need — here's the sequence that makes sense for almost everyone.

1. Drill/driver kit

The foundation. Buy it as a kit (drill + two batteries + charger) because the batteries and charger are the expensive part — often worth more than the drill itself. This is the one time the kit math favors you.

2. Impact driver (bare tool)

Drives long screws and lag bolts without stripping heads or twisting your wrist. Once you use one, the drill goes back in the bag for driving duty. Buy it bare — you already own batteries.

3. Circular saw (bare tool)

The first real "project" tool. A 6-1/2" or 7-1/4" cordless circular saw handles sheet goods, framing lumber, and deck boards. This is where a bigger battery (4–5Ah) starts to matter.

4. Everything else, as needed

Reciprocating saw, oscillating multi-tool, angle grinder, brad nailer — buy each one when a project demands it, bare-tool, on the same battery platform. Never before.

The combo-kit trap

Holiday 5-tool kits look like incredible value per tool, but the "value" assumes you'd buy all five tools separately at full price. If three of them sit in the case for five years, you didn't save anything — you prepaid for clutter. Exception: if you genuinely need three or more of the included tools within a year, the kit wins.

Bottom line: one kit, then bare tools, in order of need. And pick the platform before you pick the drill — the 5-question quiz takes two minutes.

What each step typically costs

Ranges below are typical 2026 US retail for the major platforms. Bare means tool only, no battery or charger, which is why the order above works: the kit premium is paid once.

StepBuy it asTypical price
Drill/driverKit (2 batteries + charger)$59–$219
Impact driverBare tool$79–$149
Circular saw 6-1/2" or 7-1/4"Bare tool$119–$199
Extra 4.0–5.0Ah batterySingle or 2-pack$79–$149
Reciprocating sawBare tool$79–$129
Oscillating multi-toolBare tool$79–$119

A realistic first-year budget, two ways

The value route (Ryobi ONE+ or Craftsman V20). Drill kit at $99, impact driver bare at $79, circular saw bare at $129, and one extra high-capacity battery at $89. Total: about $396 for a kit that handles the large majority of home projects for years. Nothing in that list is a compromise you will feel on household work.

The pro route (DeWalt XR, Milwaukee M18 FUEL, Makita LXT). A brushless drill kit at $219, a brushless impact driver bare around $149, a 7-1/4 inch circular saw bare around $199, and a two-pack of 5.0Ah batteries around $149. Total: roughly $716. What the extra $320 buys is durability under daily use, better runtime, and stronger resale, not the ability to do different projects.

Notice what is not in either budget: a second charger, a tool bag upgrade, or a bit set beyond the basics. Chargers come in every kit, and bits are consumables you buy as projects demand them.

Three ordering mistakes to avoid

A worked example: three projects, three purchase dates

Say your next year holds three jobs: flat-pack furniture this month, a fence repair in the spring, and a deck rebuild in the summer. Bought in the order above, the spending follows the work instead of running ahead of it. Prices are picks inside the ranges in the table above.

WhenBuyPriceRunning total
Month 1, furnitureDrill/driver kit$139$139
Month 3, fenceImpact driver, bare$119$258
Month 6, deckCircular saw, bare$159$417
Month 6, deckExtra 5.0Ah battery$99$516

The total is $516 either way. What the order buys you is timing: if the deck slips a year, the $258 of saw and battery spending slips with it.

How to build your own order, in five steps